Equipment Sales > Posts and Installation Tools

MTE-021	Stands have a dual function. First, they can be used to hold slide hammers in an upright position for easy access. Second, they can be used to display a Quik-Post Real Estate Sign Post and sign in an office, lobby or convention center. The stand is not intended for outdoor use. Stands come in three pieces, and are easy to assemble. The stand has an approximate footprint of three feet. Assembly Diagram
QP-1017	Stakes are made of carbon steel with a wall thickness of approximately 1/8". Each stake has holes to accommodate our locking system. The stake was designed for maximum hold when installed. Installation Instructions
QP-01WS and QP-02WS	Quik-Post Realty Sign Posts are a smooth one piece design with an integrated information pocket at the top of every post. It is formed out of a rugged PVC Schedule 40 Tube, and is painted with an environmentally safe plastic coating using UV protectants. Dimensions Accommodates a 24" wide sign With (optional) bracket, accommodates a 24" wide arm rider Sign hanging hardware provided Accommodates flyers 8 1/2 x 11 or 8 1/2 x 17 Available in heights of 4' or 6' Optional Equipment: Stake, Stand, Rider attachment
SP-3HW	The 3' Hidden Post is primarily designed for areas with strict ordinances and home owner association regulations. Post can be installed using a Quik-Post Systems stake, or used with a stand for conferences or offices. Accommodates a 24"x 18" sign Accommodates a standard 8 1/2 x 12 flat flyer box Actual installed height 36" Sign hanging hardware provided Installs with a Quik-Post Systems Stake Optional Equipment: Stake, Stand, Flat Flyer Box
SPW-4 and SPB-4	The 4' Single Post is primarily designed for areas with strict ordinances and home owner association regulations. Post can be installed using a Quik-Post Systems stake, or used with a stand for conferences or offices. Accommodates a 24"x 18" sign Accommodates a standard 8 1/2 x 12 flat flyer box Actual installed height 46" Sign hanging hardware provided Installs with a Quik-Post Systems Stake Optional Equipment: Stake, Stand, Flat Flyer Box
QP-24	The 4' Double Post is designed for areas with strict ordinances and home owner association regulations. This post is made from the same rugged PVC, and uses a steel 13 guage cross bar for sign mounting. Accommodates a 24"x 18" sign Installs with a Quik-Post Systems Stake Sign hanging hardware provided Optional Equipment: Decorative post caps, rider attachment
SLD-032 and SLD-022	The Slide Hammer is used to install and remove stakes. They are available in either 22lb or 32lb weights. These hammers are made of heavy gauge steel up to a 1/2" thick on some parts. The body is powder coated with plated internal parts, and finished with a urethane handle. The simple design makes the hammer easy to use and handle. The 22lb hammer is perfect for most installations. However, if you experience hard/tough ground frequently, the 32lb hammer is the best choice. 22lb hammer stands 37" tall 32lb hammer stands 40" tall Installation Instructions
SPY-007	The Wall Spyder is a unique alternative for displaying signage from a block wall, wood fence, gate or chain link fence. It is made of heavy steel, and will hold tight when installed. The clean appearance will enhance any property. It is shown with a 18" x 24" sign, may hold larger signs. Dimensions • Block Wall • Chain Link Fence • Wood Fence • Gate